We have recently introduced this small threaded body hall sensor in a few of our crank trigger conversion packages and this is the direct replacement for those.
Specifications:
Operating voltage: 5 to 24 volts
Maximum frequency: 15 kHz
Temperature range: -40 to +125 degrees C
Typical air gap: 1.5MM / .06"
Mounting Diameter: .47"
Length: 1"
Mounting Diameter: .47"
Length: 1"
Hall Sensor Wiring:
Brown - 5-24V Input
Blue - Sensor Ground
Signal - Output Signal
Brown - 5-24V Input
Blue - Sensor Ground
Signal - Output Signal
Pullup Resistor Required (Input to Signal)
| 5v | 9V | 12V | 16V | 24V |
| 1K | 1.8K | 2.4K | 3K | 3K |
Illustration for using a 5V power voltage
