If the Mexican intake manifold isn't large enough for your application this intake manifold is the next step. Available in 45 or 48mm.
Typically used on naturally aspirated engine sizes from 1776 to 2276 or turbo applications from 1600 to 2l+
The Dub Shop single throttle body manifold includes:
1 x 2" to 1-5/8" "Y" manifold
.375" throttle body flange
3/8" NPT temp sensor bung
2 x Silicone intake couplings
4 x 2" Band Clamps (NA)
4 x 2" T-Bolt Clamps (Boosted)
Note:
For the best fit, a Mexican alternator stand is required if you do not already have one. It provides additional clearance under the alternator for the large intake tubing. Optionally I can modify this to work with a standard alt stand by slightly compressing the passenger side transition.
