Often times a small single throttle body is performance limiting. These large single throttle bodies allows you to get some of that performance back!
- Available in 45 and 48mm
- 1/8" NPT Vacuum port
- Simple 4 bolt mounting pattern
- O-ring sealed lower mounting flange
- Stainless steel shaft with sealed roller bearings
- Stainless steel levers with standard barrel nut cable attachment
- Stainless steel universal throttle lever can be mounted at any position
- Barbed intake tube can be used with 2 inch air filter of silicone coupler
- Intake tube also o-ring sealed
Bolt pattern is 50mm square with 6mm through holes
These can be configured for clockwise or anti clockwise rotation
45mm has a tapered bore
48mm is a straight bore for use with 2inch tubing for best flow
*These have a auxiliary injector port that will be plugged. Fuel rails are available at additional cost.
10/8/2020 - Now including TPS sensor, adapter and connector in package