The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

IGN-1A Coil Pack

(No reviews yet) Write a Review
Calculated at Checkout
IGN-1A Ignition Coil
  • IGN-1A Coil Connector

The IGN-1A Ignition coil is the most powerful logic coil available. It delivers enough energy to ignite rich mixtures in all fuels with 25+ PSI of boost.

  • Output (no load): 40kV minimum
  • Output (50pF load): 40kV +/- 10%
  • Output Energy: 103 mJ +/- 7%
  • Peak Secondary Current: 102 mA +/- 10%
  • Arc Duration: 2.9mS +/- 10%
  • Turns Ratio 71:1
  • Maximum Current: 19 Amps
  • Maximum Battery Voltage: 17 Volts
  • Base Dwell: 3.0 mS
  • Max Continuous Dwell: 9 mS but don’t exceed 40% duty cycle
  • Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
  • High Tension Wire Terminal: HEI “spark plug top” Style

Wiring Information:
A – Ignition signal from ECU (Logic Level)

B – Logic ground, connect to ECU sensor ground
C – Spark wire ground, connect to cylinder head
D – Power ground, connect to battery negative
E – 12 volt battery power