The easiest way to add fuel injection with a single throttle body to your smaller displacement engine.
Typically used on naturally aspirated engine sizes from 1600 to 1915 or Turbo setups from 1600 to 2276.
The base Mexican intake kit includes:
1 x Throttle body (43mm)
1 x Throttle position sensor (used)
1 x Idle Solenoid holder
1 x Plenum
2 x End castings
2 x Rubber manifold couple (used)
2 x Fuel rails (used)
4 x Fuel injector seals (new)
2 x Intake gaskets (new)
Modernize:
Open fuel rails for modern injectors
Cut injector seals to size
Install long throttle stop screw
Modernize:
Open fuel rails for modern injectors
Cut injector seals to size
Install long throttle stop screw
Note:
The Mexican alternator stand is required if you do not already have one. It provides additional clearance under the alternator for the dual intake runners.
