If the Mexican intake manifold isn't large enough for your application this intake manifold is the next step. Available in 45 or 48mm.
Typically used on naturally aspirated engine sizes from 1776 to 2276 or turbo applications from 1600 to 2l+
The Dub Shop single throttle body intake package includes:
1 x Throttle body (45 / 48mm)
Adjustable linkage
TPS clocking plate
Air filter adapter
Aux injector plug
Throttle position sensor
1 x 2" "Y" manifold
.5" throttle body flange
IAT/MAT temp sensor bung
2 x Silicone intake couplings
4 x Stainless T-bolt clamps
2 x Modified CB EFI end castings with 2" inlets
2 x Standard fuel rails
2 x Fuel rail brackets
2 x Fuel injector retainers
1 x Air filter
Uses stock throttle cable
Note:
The Mexican alternator stand is required if you do not already have one. It provides additional clearance under the alternator for the large intake tubing.